Hello Vinyl Decal for Front Door

Hello decal perfect for front doors, sliding glass doors, bathrooms mirrors, glass windows, glass doors or any flat surface.

Size: 4 inches Height x 9 inches Width

*Die-Cut means only the color design is what stays on your application*

We use Oracal vinyl to ensure the Quality of the product.

Made in Florida, US

When Installing

-Do not attempt to install in extreme cold/hot temperatures. 50-90°F is ideal.

-Clean surfaces of wax/grease before applying

To Install

1) Flatten decal out on table, rub slightly to make sure transfer tape is sticking well.

2) Peel the back paper off the vinyl carefully making sure the vinyl stays on the transfer tape. Its usually easier to peel from the back side than the front.

3) Position decal, and place on desired area.

4) Rub the sticker from side to side to eliminate bubbles and make it stick to surface. Use squeegee if possible.

5) Slowly remove transfer tape. Fold it over itself and pull to the side. If part of the vinyl starts to lift then hold it down while peeling the tape. If its a well prepped reasonable surface you should not have issue.

6) Once the tape is removed keep patting the sticker down, pressure and heat make it hold best.

** No returns accepted for wrongly applied decals **

If you have an issue with a decal, please be sure to contact us!